Follow


Subscribe

Credence Filling Systems

Fill it Right the First Time

Our Machines

Leading the Way

Credence is a family-owned and operated company out of Tempe, Arizona with over 25 years of Engineering expertise. Our innovative team prides itself on designing and manufacturing the most efficient cartridge filling and capping systems to meet our customers' needs.

No Oil Is Too Tough for Us to Put in a Cartridge.

The Credence Filling System is a true volumetric cartridge filling system designed specifically for high viscosity extracts and distillates. No oil is too hard for our cartridge filling machines put into a cartridge!

Learn more

Dedicated to Complete Customer Focus

  • Instant Access to Service Personnel
  • Full Stock of Machines and Parts
  • Creative Solutions to Manufacturing Problems

Meeting the Needs of a Rapidly Evolving Industry

  • Low-Cost Upgrades
  • Design-Based Solutions
  • Fast Turn-Around

Continuous Improvement of Existing Products

  • Modular Designs for Easy Upgrades
  • Game-Changing Innovation
  • Scalable Designs

Breakthrough Product Development

  • Free Development of Process Components for Full Utilization
  • Design Tools for New Products
  • Spare Machines & Tools for Periods of High Volume
  • Free Consulting

The Best of the Best

Credence Filling Systems has developed a sophisticated product line. Our machines are user-friendly, accurate, allow for repeatable filling, and achieve precision fill weights.

Learn more
September 12, 2022
Using a needle to inject concentrate into a pre-roll, it is necessary to keep the concentrate at the optimum temperature so that it can flow freely through the delivery system, and ultimately through the needle for accurate placement of the concentrate within the pre-roll. Some concentrates have the tendency to freeze or nearly freeze up in the needle because the needle is exposed to the room environment, which could be cooler than expected, especially during the hot months of summer. At Credence, we continually look for issues like this and come up with ways to prevent them from causing lost product or downtime. The PRI-600 pre-roll infusion machine has a 4” long needle and is therefore prone to allow the concentrate inside to freeze if there is a long delay between pre-roll infusions. To alleviate this problem, we attached our patented needle heater to a spring-loaded beam that holds the needle down at the needle tip just above the needle port holes. As the pre-roll is raised by the system elevator, it makes contact with the bottom surface of the needle heater and pushes it upward as the needle enters. Heat is generated throughout the needle as it goes up and down on each cycle, keeping the internal concentrate liquid flowing smoothly. We added another software feature where, if there is a delay by a predefined time in infusing the next pre-roll, the elevator automatically raises slowly while a warning blinks on the screen. The elevator raises until the needle point is within the pre-roll fixture and then increases speed up and down until the operator presses the CLR (Clear) button to continue infusing. This keeps the concentrate in the needle at a liquid state while the operator is away and keeps the PRI-600 always ready to run production.
By Bob Hansen February 26, 2021
   Rosin comes from an extraction process that uses heat and pressure to squeeze cannabis into a resinous sap. Unlike hydrocarbon extraction methods, it doesn’t use solvents such as butane to help extract the cannabinoids and terpenes.     The major benefits of rosin are the result of not using solvents. First at the production level, there is not an extra step to remove the solvents. There is no need for extensive testing to make sure that all solvents have [...]
By Bob Hansen January 11, 2021
Introducing our newest addition to our product line: the CMS-3000 array attachment. The Credence Mobile Shot extends any of our filling machines so that you can easily fill cartridges packed in a foam array without unpacking and repacking. The extension line connects to the filling machine and is operated with a hand held grip. A push button at the top of the grip turns on the pump cycle. The grip also contains a needle heater inside for maintaining the proper temperature for the needle, which [...]
By Bob Hansen December 5, 2020
As your business grows and you’re capable of producing more oil, we are here to help you increase your productivity with our filling and capping machines. Here are two comparisons showing the difference that you can save over time using our machines rather than filling by hand.If you are producing 10,000 cartridges per month, here is a comparison to the CFS-1000M: #element-c9d112f2-66e0-4a73-99c9-357e8a9eeeae .simple-table-wrapper { padding: 20px 0;}#element-c9d112f2-66e0-4a73-99c9-357e [...]
Show More

Testimonials

  • testimonial 1

    Slide title

    "Working with Credence has been a delight. The equipment is high quality and ultra-reliable and the same goes with the Credence team. At Lehua Brands we run our equipment daily. We fill multiple hardware platforms from 510's to disposables to pods. Each of our brands has a unique formulation and hardware and thus the flexibility of the equipment was a key feature for us. As our volumes increased it was easy to scale up by adding a second machine. I highly recommend Credence for anyone who is looking to build a thriving manufacturing business."


    Randy Reed

    Lehua Brands

    Washington

    https://lehuabrands.com

    https://lehuabrands.com
  • testimonial 2

    Slide title

    "Credence Engineering Inc. has been a vital part of our growth and development for Clean Labs AZ. Since May 2018, we have been utilizing Credence Filling Systems for our production needs. Credence always displays integrity when it comes to customer satisfaction and service. As a customer, we have been really well taken care of and we always recommend Credence Engineering Inc. to others who want to grow their business as well.


    Hannah Maskulka

    Clean Labs AZ

    Arizona

    https://nirvanacenter.com

    https://nirvanacenter.com
  • testimonial 3

    Slide title

    "At Lucky Turtle we leverage our former biotech process engineering experience to our extraction process design and equipment selections. We have spent over $1M outfitting the Lucky Turtle Production facility carefully selecting equipment that will help us deliver quality products. Out of all the equipment we have purchased, we are most happy with our Credence fill machine and the customer service we get from the Credence Engineering team. The ease of operation and precise filling delivers on the promise of the cost per gram reduction. Credence Engineering selected the right type of pump, the right product contact materials of construction, and a smart cleanable design with minimal hold-up. These features help us deliver products that are true to the plant, safe, and high quality. The ability to fill every cartridge right, every time -- keeps our Lucky Turtle team and customers happy."


    Doug Mers

    Lucky Turtle

    Colorado

    https://luckyturtle.com

    Button
  • testimonial 4

    Slide title

    "Apart from improving accuracy and reducing manufacturing time, Credence equipment is designed in a manner that allows for precise quality control, not just when it comes to filling cartridges, but also capping. Whether you have a compression mouthpiece or utilize a threaded design, Credence can accommodate both with their automated capping equipment, streamlining a process that can otherwise be time constuming and lack consistency."


    Anthony Rein

    High Grade AZ

    Arizona

    http://www.highgradeaz.com

    Button
  • testimonial 5

    Slide title

    "We brought our first Credence machine after talking to Jim Ellis about our MRB in Ohio. I called a few references and Credence got stellar marks for the things we think are important:

    A. Quick and easy changeover for different types of Pens and Cartridges

    B. Easy dose adjustment

    C. Capable of steady, consistent pen filling

    We have easily achieved well past Credence's production recommendations. We currently fill over 6 types of pens and carts. Credence has made custom nests for each one. Customer service and willingness to help troubleshoot is fantastic."


    Jeff Hollenback -- COO

    BeneLeaves

    Ohio

    https://beneleaves.com

    Button
  • testimonial 6

    Slide title

    "I have been using the Credence CFS-1000M filling system and the CSS-1000P capping system for one full year, producing both 500mg disposables and cartridges. Having a medical device engineering background, I was particularly focused on choosing a production filling system that was designed for reliable and accurate performance from a company with a solid technical team. I could not be happier with my choice, nor more impressed with the Credence machines and team. We validated the filling machine over 10 production batches, spanning 5 different oil formulations, 2 different hardware styles, using 3 different operators for each batch. I was amazed that the long-term process capability (6 sigma) established during these validation batches was +/- .002 gram. The importance of this capability cannot be overstated: our customers always get what they pay for without us having to set our fill targets above the nominal 500mg. The Credence team is top notch, and it's refreshing to work with technical professionals in an industry that sometimes lacks professionalism. Over the past year, we have had several discussions about how to further imrpove the system designs, and voila! Many of those suggested improvements make it into the newer designs. It's this kind of technical capability that I want working for me as we scale production."


    Dave Georgis -- COO

    Chooze Corp

    Colorado

    Button
  • testimonial 7

    Slide title

    "Our company purchased a Credence cartridge filling machine, and as we were the first country in Europe to use this machine, I was sent to Arizona to learn how to operate and maintain it. In 3 days, Jim and Blake taught me all there is to know about the machine, while giving me royal hospitality. I left my first visit ever to the US with a great filling machine and some great new friends. Now, almost 3 years later, I can say that the filling machine never failed me, and Jim and Blake assisted me with anything I needed."


    Eric Zeldin -- Director

    MabsutLife

    Slovenia

    https://phenopen.com

    Button
  • Slide title

    “Working with Credence has been a delight. The equipment is high quality and ultra reliable and the same goes with the Credence team. At Lehua Brands we run our equipment daily. We fill multiple hardware platforms from 510’s to disposables to pods. Each of our brands has a unique formulation and hardware and thus the flexibility of the equipment was a key feature for us. As our volumes increased it was easy to scale up by adding a second machine. I highly recommend Credence for anyone who is looking to build a thriving manufacturing business.”


    Randy Reed

    Lehua Brands

    Washington

    https://lehuabrands.com

    Button
  • Slide title

    “Credence Engineering Inc. has been a vital part of our growth and development for Clean Labs AZ. Since May 2018, we have been utilizing Credence Filling Systems for our production needs. Credence always displays integrity when it comes to customer satisfaction and service. As a customer, we have been really well taken care of and we always recommend Credence Engineering Inc. to others who want to grow their business as well.”


    Hannah Maskulka

    Clean Labs AZ

    Arizona

    https://nirvanacenter.com

    Button
  • Slide title


    “At Lucky Turtle we leverage our former biotech process engineering experience to our extraction process design and equipment selections. We have spent over $1M outfitting the Lucky Turtle Production facility carefully selecting equipment that will help us deliver quality products. Out of all the equipment we have purchased, we are most happy with our Credence fill machine and the customer service we get from the Credence Engineering team. The ease of operation and precise filling delivers on the promise of the cost per gram reduction. Credence Engineering selected the right type of pump, the right product contact materials of construction, and a smart cleanable design with minimal hold-up. These features help us deliver products that are true to the plant, safe, and high quality. The ability to fill every cartridge right, every time – keeps our Lucky Turtle team and customers happy.”


    Doug Mers

    Lucky Turtle

    Colorado

    https://luckyturtle.com


    Button
  • Slide title

    “Apart from improving accuracy and reducing manufacturing time, Credence equipment is designed in a manner that allows for precise quality control, not just when it comes to filling cartridges, but also, capping. Whether you have a compression mouthpiece or utilize a threaded design, Credence can accommodate both with their automated capping equipment, streamlining a process that can otherwise be time consuming and lack consistency.”


    Anthony Rein

    High Grade AZ

    Arizona

    http://www.highgradeaz.com


    Button
  • Slide title

    “We bought our first Credence machine after talking to Jim Ellis about our MRB in Ohio. I called a few references and Credence got stellar marks for the things we think are important: 

    A. Quick and easy changeover for different types of Pens and Cartridges 

    B. Easy dose adjustment 

    C. Capable of steady, consistent pen filling. 

    We have easily achieved well past Credence's production recommendations. We currently fill over 6 types of pens and carts. Credence has made custom nests for each one. Customer service and willingness to help troubleshoot is fantastic.”


    Jeff Hollenback – COO

    BeneLeaves

    Ohio

    https://beneleaves.com


    Button
  • Slide title

    “I have been using the Credence CFS-1000M filling system and the CCS-1000P capping system for one full year, producing both 500mg disposables and cartridges. Having a medical device engineering background, I was particularly focused on choosing a production filling system that was designed for reliable and accurate performance from a company with a solid technical team. I could not be happier with my choice, nor more impressed with the Credence machines and team. We validated the filling machine over 10 production batches, spanning 5 different oil formulations, 2 different hardware styles, using 3 different operators for each batch. I was amazed that the long-term process capability (6 sigma) established during these validation batches was +/- 2% of fill volume. Better yet, we have since dialed the process in so that any one fill batch varies only +/- .002 gram. The importance of this capability cannot be overstated: our customers always get what they pay for without us having to set our fill targets above the nominal 500mg. The Credence team is top notch, and it’s refreshing to work with technical professionals in an industry that sometimes lacks professionalism. Over the past year, we have had several discussions about how to further improve the system designs, and voila!, many of those suggested improvements make it into the newer designs. It’s this kind of technical capability that I want working for me as we scale production.”


    Dave Georgis – COO

    Chooze Corp

    Colorado


    Button
  • Slide title

    “Our company purchased a Credence cartridge filling machine, and as we were the first country in Europe to use this machine, I was sent to Arizona to learn how to operate and maintain it.

    In 3 days, Jim and Blake taught me all there is to know about the machine, while giving me royal hospitality. 

    I left my first visit ever to the US with a great filling machine and some great new friends. Now, almost 3 years later, I can say that the filling machine never failed me, and Jim and Blake assisted me with anything I needed.”


    Eric Zeldin – Director

    MabsutLife

    Slovenia

    https://phenopen.com


    Button

Testimonials

  • I have had a great experience working with your company over the last few years here representing Mammoth. I appreciate all the work we've accomplished together and am happy to pass off your contact information to the team that will be handling automation needs moving forward. I'm leaving the company with full support to pursue other career options, and I hope your relationship with mammoth continues to thrive in my absence!


    Joe Leone

    Mammoth Distribution

    http://www.mammoth.org/

    http://www.mammoth.org/
  • testimonial 4

    Slide title

    "Apart from improving accuracy and reducing manufacturing time, Credence equipment is designed in a manner that allows for precise quality control, not just when it comes to filling cartridges, but also capping. Whether you have a compression mouthpiece or utilize a threaded design, Credence can accommodate both with their automated capping equipment, streamlining a process that can otherwise be time constuming and lack consistency."


    Anthony Rein

    High Grade AZ

    Arizona

    http://www.highgradeaz.com

    Button
  • testimonial 1

    Slide title

    "Working with Credence has been a delight. The equipment is high quality and ultra-reliable and the same goes with the Credence team. At Lehua Brands we run our equipment daily. We fill multiple hardware platforms from 510's to disposables to pods. Each of our brands has a unique formulation and hardware and thus the flexibility of the equipment was a key feature for us. As our volumes increased it was easy to scale up by adding a second machine. I highly recommend Credence for anyone who is looking to build a thriving manufacturing business."


    Randy Reed

    Lehua Brands

    Washington

    https://lehuabrands.com

    https://lehuabrands.com
  • testimonial 2

    Slide title

    "Credence Engineering Inc. has been a vital part of our growth and development for Clean Labs AZ. Since May 2018, we have been utilizing Credence Filling Systems for our production needs. Credence always displays integrity when it comes to customer satisfaction and service. As a customer, we have been really well taken care of and we always recommend Credence Engineering Inc. to others who want to grow their business as well.


    Hannah Maskulka

    Clean Labs AZ

    Arizona

    https://nirvanacenter.com

    https://nirvanacenter.com
  • testimonial 3

    Slide title

    "At Lucky Turtle we leverage our former biotech process engineering experience to our extraction process design and equipment selections. We have spent over $1M outfitting the Lucky Turtle Production facility carefully selecting equipment that will help us deliver quality products. Out of all the equipment we have purchased, we are most happy with our Credence fill machine and the customer service we get from the Credence Engineering team. The ease of operation and precise filling delivers on the promise of the cost per gram reduction. Credence Engineering selected the right type of pump, the right product contact materials of construction, and a smart cleanable design with minimal hold-up. These features help us deliver products that are true to the plant, safe, and high quality. The ability to fill every cartridge right, every time -- keeps our Lucky Turtle team and customers happy."


    Doug Mers

    Lucky Turtle

    Colorado

    https://luckyturtle.com

    Button
  • testimonial 5

    Slide title

    "We brought our first Credence machine after talking to Jim Ellis about our MRB in Ohio. I called a few references and Credence got stellar marks for the things we think are important:

    A. Quick and easy changeover for different types of Pens and Cartridges

    B. Easy dose adjustment

    C. Capable of steady, consistent pen filling

    We have easily achieved well past Credence's production recommendations. We currently fill over 6 types of pens and carts. Credence has made custom nests for each one. Customer service and willingness to help troubleshoot is fantastic."


    Jeff Hollenback -- COO

    BeneLeaves

    Ohio

    https://beneleaves.com

    Button
  • testimonial 6

    Slide title

    "I have been using the Credence CFS-1000M filling system and the CSS-1000P capping system for one full year, producing both 500mg disposables and cartridges. Having a medical device engineering background, I was particularly focused on choosing a production filling system that was designed for reliable and accurate performance from a company with a solid technical team. I could not be happier with my choice, nor more impressed with the Credence machines and team. We validated the filling machine over 10 production batches, spanning 5 different oil formulations, 2 different hardware styles, using 3 different operators for each batch. I was amazed that the long-term process capability (6 sigma) established during these validation batches was +/- .002 gram. The importance of this capability cannot be overstated: our customers always get what they pay for without us having to set our fill targets above the nominal 500mg. The Credence team is top notch, and it's refreshing to work with technical professionals in an industry that sometimes lacks professionalism. Over the past year, we have had several discussions about how to further imrpove the system designs, and voila! Many of those suggested improvements make it into the newer designs. It's this kind of technical capability that I want working for me as we scale production."


    Dave Georgis -- COO

    Chooze Corp

    Colorado

    Button
  • testimonial 7

    Slide title

    "Our company purchased a Credence cartridge filling machine, and as we were the first country in Europe to use this machine, I was sent to Arizona to learn how to operate and maintain it. In 3 days, Jim and Blake taught me all there is to know about the machine, while giving me royal hospitality. I left my first visit ever to the US with a great filling machine and some great new friends. Now, almost 3 years later, I can say that the filling machine never failed me, and Jim and Blake assisted me with anything I needed."


    Eric Zeldin -- Director

    MabsutLife

    Slovenia

    https://phenopen.com

    Button
  • “I originally spoke with Blake at Credence about purchasing the right filling machine to meet my needs here at C&D Products. Blake informed me on all the equipment that Credence offers and assured me I’d be receiving a quality filling system with ‘the best’ customer service if I purchased from them. After receiving my CFS-1000M in April of 2021, I can say that Credence stayed true to their word and followed through on their promise of quality and customer service. Our system works flawlessly, and we’ve filled well over 250,000 cartridges without any issues. Worth every penny and highly recommended!”


    David Calderon

    C&D Products

    Indianapolis, IN

    https://remedypremiumhemp.com

    http://cdpinc.com


    Button
  • Slide title

    “Working with Credence has been a delight. The equipment is high quality and ultra reliable and the same goes with the Credence team. At Lehua Brands we run our equipment daily. We fill multiple hardware platforms from 510’s to disposables to pods. Each of our brands has a unique formulation and hardware and thus the flexibility of the equipment was a key feature for us. As our volumes increased it was easy to scale up by adding a second machine. I highly recommend Credence for anyone who is looking to build a thriving manufacturing business.”


    Randy Reed

    Lehua Brands

    Washington

    https://lehuabrands.com

    Button
  • Slide title

    “Credence Engineering Inc. has been a vital part of our growth and development for Clean Labs AZ. Since May 2018, we have been utilizing Credence Filling Systems for our production needs. Credence always displays integrity when it comes to customer satisfaction and service. As a customer, we have been really well taken care of and we always recommend Credence Engineering Inc. to others who want to grow their business as well.”


    Hannah Maskulka

    Clean Labs AZ

    Arizona

    https://nirvanacenter.com

    Button
  • Slide title


    “At Lucky Turtle we leverage our former biotech process engineering experience to our extraction process design and equipment selections. We have spent over $1M outfitting the Lucky Turtle Production facility carefully selecting equipment that will help us deliver quality products. Out of all the equipment we have purchased, we are most happy with our Credence fill machine and the customer service we get from the Credence Engineering team. The ease of operation and precise filling delivers on the promise of the cost per gram reduction. Credence Engineering selected the right type of pump, the right product contact materials of construction, and a smart cleanable design with minimal hold-up. These features help us deliver products that are true to the plant, safe, and high quality. The ability to fill every cartridge right, every time – keeps our Lucky Turtle team and customers happy.”


    Doug Mers

    Lucky Turtle

    Colorado

    https://luckyturtle.com


    Button
  • Slide title

    “Apart from improving accuracy and reducing manufacturing time, Credence equipment is designed in a manner that allows for precise quality control, not just when it comes to filling cartridges, but also, capping. Whether you have a compression mouthpiece or utilize a threaded design, Credence can accommodate both with their automated capping equipment, streamlining a process that can otherwise be time consuming and lack consistency.”


    Anthony Rein

    High Grade AZ

    Arizona

    http://www.highgradeaz.com


    Button
  • Slide title

    “We bought our first Credence machine after talking to Jim Ellis about our MRB in Ohio. I called a few references and Credence got stellar marks for the things we think are important: 

    A. Quick and easy changeover for different types of Pens and Cartridges 

    B. Easy dose adjustment 

    C. Capable of steady, consistent pen filling. 

    We have easily achieved well past Credence's production recommendations. We currently fill over 6 types of pens and carts. Credence has made custom nests for each one. Customer service and willingness to help troubleshoot is fantastic.”


    Jeff Hollenback – COO

    BeneLeaves

    Ohio

    https://beneleaves.com


    Button
  • Slide title

    “Our company purchased a Credence cartridge filling machine, and as we were the first country in Europe to use this machine, I was sent to Arizona to learn how to operate and maintain it.

    In 3 days, Jim and Blake taught me all there is to know about the machine, while giving me royal hospitality. 

    I left my first visit ever to the US with a great filling machine and some great new friends. Now, almost 3 years later, I can say that the filling machine never failed me, and Jim and Blake assisted me with anything I needed.”


    Eric Zeldin – Director

    MabsutLife

    Slovenia

    https://phenopen.com


    Button
Share by: